Niveau torpille à billette compact

I use this level mostly to grade PVC pipe. I like how the direction of the grade reads both ways for grading pipe at an 1/4 inch per foot. The markings on it, however, are wrong. Unfortunately the markings indicate 1/4in to 1/2in per foot... learned this the hard way syncing it up with other levels. For almost a year i was grading my pipe at a 1/2in per foot thinking it was a 1/4in (plumbers never need to grade anything faster then 1/4in). The application for this level should strictly be for grading pipe in the dirt. I know you guys can a will make a better one, or a new one. Remove the magnets and make it 10" instead of 6" for accuracy. I like how it sits perfectly on the pipe with the slot on the side without the magnets. You are this close to making an unbeatable waste and vent level.

I have a Klien level and never used this one until recently because I liked the bigger spirit level. Anyway the magnet on the bottom came loose right away. Now it doesn’t sit level unless I push the magnet in every tome I use it. Also the magnets are way less strong than Klien. If you look at the photos ypu can see it is almost brand new and hardly used. I wish I could return it but I waited too long to use it after buying it.

I don't know what everyone else is talking about my level was accurate to 1 and 2%. I didn't test it against another level I tested it level and then shot the elevations of each line 16th on the second line 8th on the 3rd, being that it's 6 in long or so that translates to a ⅛ and a ¼ fall over a foot. As a couple features the competitors don't have, cut out for weld, The magnets are good and strong, its handy and rugged. Love it

This is my 4th one. Reason being is over time the windows and level lines get hard to see from dailey use(I’m a union plumber with the UA going on 25 years). Other than that I don’t have a single complaint. Never an issue with magnets which are quite strong for a level. Never an issue after a fall to the ground off a ladder or a scissor lift. If it had bubbles that lit up it would get a 5

I bought this in a 3 pack of Milwaukee levels. It worked great until it didn't. I've had it about 9 months. I use it on copper, mechanical, cast iron and metal studs. One magnet fell out and a week later it's got one left . I tried putting them back in but they don't stay in. I'm a milwaukee fan and have everything Milwaukee. Its a little disappointing it's not durable.

I've had this level for about 8 months and use it just about everyday. It was my favorite level until today. I got into a dispute about the 1/4" grade I was installing the pipe at, so I built a jig to test our plumbing levels and sure enough my level was the only one that was off. The graded vial is for 1/4" and 1/2" per foot not 1/8" and 1/4" as it was advertised for.

nice level while it lasts, as of now i have the second magnet falling out, which affects the level. And on the non-magnet side it has started to warp which also causes the level to be off, all in all this is my second one of these indint think there will be a third, price just doesn't match the quality anymore.

Again Milwaukee Tool has Exceeded Themselves. This Level Is Machined Aluminum with Large Clear Vials, Magnets So Strong that it Could Pull level out of your Hand and Attract to the Product Your Working On. Super Clean and Precision Level. Would Highly Recommend!!! This is Why I buy Milwaukee Tools... Just Say'n!!!