Livraison par colis
Emporte-pièce (scie-cloche) Hole Dozer avec dents de carbure, 3"
Code BMR
001-9079
Numéro d'article
49-56-0734
UPC
045242504220
Emporte-pièce (scie-cloche) Hole Dozer avec dents de carbure, 3"
L'emporte-pièce HOLE DOZER avec dents de carbure de MILWAUKEE présente une nouvelle conception à 3 DPP qui offre aux utilisateurs des coupes rapides avec la durabilité d'une scie cloche bimétallique et la durée de vie d'un emporte-pièce au carbure. L'emporte-pièce HOLE DOZER avec dents de carbure offre une durée de vie plus longue dans les matériaux d'usage général et les matériaux extrêmes, avec la capacité de couper facilement l'acier inoxydable, la fonte, le bois contenant des fixations, les panneaux de ciment, la fibre de verre, le plâtre, les bardeaux d'asphalte et plus encore. Les échancrures profondes dégagent rapidement le matériau pendant la coupe et les FENTES MULTI ACCÈS éliminent la frustration ressentie lorsqu'on doit enlever des obturateurs, augmentant ainsi la productivité et réduisant le temps d'arrêt entre les trous. Le nouveau concept de fente procure aux utilisateurs une visibilité accrue qui permet de le placer de manière précise et d'éjecter les copeaux plus rapidement tout en assurant la fraIcheur de coupe. L'emporte-pièce HOLE DOZER avec dents de carbure offre une profondeur de coupe de 1,62 po, permettant ainsi le dégagement nécessaire pour gérer les coupures dans une grande variété de matériaux.
Centre de Rénovation G. Doyon (Bromont) Ramassage en magasin gratuit disponible 7 à 10 jours
*Le prix et l’inventaire des produits offerts sur le site web peuvent varier. Le prix peut diverger d’un prix annoncé en raison de conditions variables dans les différents marchés, d’erreurs ou de situations hors de notre contrôle.
• L'emporte-pièce au carbure la plus durable
• La plus longue durée de vie dans les matériaux d'usage général et les matériaux extrêmes
• Coupes plus rapides grâce à la conception à 3 DPP
• Fentes multi-accès pour un retrait plus rapide des bouchons
• Coupe l'acier inoxydable, le bois contenant des fixations, les panneaux de ciment, la fibre de verre, le plâtre, les bardeaux d'asphalte, et plus encore
• Pour les applications les plus difficiles où les scies bimétaliques ne peuvent pas couper
• Profondeur de coupe de 1-5/8 po
| Dimension | 3 po |
|---|---|
| Diamètre | 3 po |
| Marque de commerce | MILWAUKEE |
| Type d'outils électriques et sans-fils | Mandrins pour scies emporte-pièces |
Évaluations
Filtrer les avis
Cote
Paramètre régional
1 to 8 sur 105 commentaire
1 – 8 sur 105 commentaire
Les plus pertinents
JeffR
Pittsburgh, Pa
Âge45 à 54 ans
SexeHomme
5 étoile(s) sur 5.
works Great!!!!!
il y a 3 ans
[This review was collected as part of a promotion.] Another quality tool by Milwaukee. This 3" Hole Dozer works great. It's solid and well made. It's made of high quality steel and the teeth are extremely sharp. It fits perfectly on the shank and stays in place. It cuts through the wood instead of burning through the wood. I've cut about 10 holes with this dozer and it still cuts through the wood like cutting through butter. It leaves me with smooth edges instead of splintered edges like a lot of whole saws do. I have no cons to report on this product. It works exactly like it's meant to work and it saves me time by cutting through the wood very quickly. I definitely recommend this product.
Traduire avec Google
Affiché initialement sur milwaukeetool.com
Dondi
Marblehead/Salem Ma.
5 étoile(s) sur 5.
I would defiantly buy these again
il y a un an
WOW these hole saws are great. I use them for cutting through sheetrock walls with metal studs in the way, and horse-hair plaster walls. They cut with ease and removing the plugs afterwards is so much easier with the multiple openings. Very sharp and so far no ware on the carbide teeth. The arbors are tough and strong, the rubber "O" ring helps the locking-nut from backing off. It would be great if the smaller arbor shank could be bored out so a feeler-bit could be used, so to drill through (straight) both sides of a wall.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Vivezza
Bisbee arizona
4 étoile(s) sur 5.
I would buy this again
il y a un an
I used the 1 3/8” right away and it worked perfectly. Easy to attach and cut. Getting the cut piece out of the dozer is a bit difficult. I used a screw driver to unscrew the dozer so I could pop the cut piece out of the dozer. But overall great. The only problem I had was with the larger dozer. The shank is to large to fit in any of the the three drills I own (I even tried a different brand that I had) so I will have to see which driver can accommodate the shank so I can use the larger sizes.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Shawn1870
Aurora IL.
4 étoile(s) sur 5.
Good but not Milwaukee great
il y a un an
I got these as a try me from Milwaukee. After reading the other reviews I put the negative to the test. I can see where people are having a hard time with getting the arbor off after use. The rubber o-ring is something that Milwaukee didn't need to reinvent wheel with. It invites overtighening, instead of hand tightening the nut. I can see newbies trying to use wrenches to tighten it and having the problems. A few times doing this and you'll blow out the o-ring, causing it to seize on the hole saw. I've used my Milford arbor for 15+ years now, with zero problems.
Other reviews had out of round hole saws. Mine cut great with no problems. The saws are the best you can buy and I'll be using these a long time. The arbor could use some work for everyday real use. I can't give 5 stars because of the arbor.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Kurtiss57
Palmdale, CA
5 étoile(s) sur 5.
Hole Dozer though Aluminum
il y a un an
Used the 1", 1-1/4" and 3-1/4" Hole Dozer's to cut through 1/4" thick, 6061 aluminum plate. After cutting many holes through the abrasive aluminum plate, the cuts were clean and the cutouts were easy to remove from the Hole Dozer's access holes. The small and large arbor design eliminates annoying slippage for a quick cut. When cutting holes in tight spots where the 1/4" pilot drill bit is too long, I have had to shorten the pilot bit so I don't drill into what's behind it.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
thomasinwisconsin
Hudson, WI
Âge35 à 44 ans
SexeHomme
5 étoile(s) sur 5.
Great Hole Saw
il y a 3 ans
[This review was collected as part of a promotion.] professional carpenter and use hole saws several times a week. The Hole Dozer from Milwaukee has become my go to hole saw. It has very sharp carbide teeth that really stay sharp. Most everything I drill is wood with the occasional nail in it and these cut hole saws cut right through both with no problem. The multiple holes and cut outs in the saw also really cut down on it heating up and make pulling the wood plug out very easy.
Traduire avec GoogleAffiché initialement sur milwaukeetool.com
Will I am
Fairhaven
Âge35 à 44 ans
SexeHomme
5 étoile(s) sur 5.
Well worth it
il y a 3 ans
[This review was collected as part of a promotion.] This hole dozer works great. It is solid and going to last a long time. They are extremely sharp and cut through materials very fast. I get a smooth, clan hole and I get a perfect fit of the plumbing through the hole. It doesn't burn through the wood like a lot of cheaper hole saws do. I get smooth edges each time I've used it. I couldn't be more satisfied. I definitely recommend this hole dozer. It's well worth it.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
KY Vet
Kentucky
5 étoile(s) sur 5.
Like a hot knife going thru butter
il y a un an
I can't say enough great things about this hole saw set. I needed to put some 1" holes in 2 pieces of steel roofing for a custom wood bin I was building for a customer that would match his home and not only did this set cut thru the metal roofing like a hot knife cutting butter but is also cut through 1" thick plywood with no issues. I'm very pleased with this set as well as "ALL" my MILWAUKEE tools.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
1 – 8 sur 105 commentaire
Vous pourriez aimer :
Complétez avec :
- Ajouter à ma liste de souhaits
MILWAUKEEMèche de perceuse à percussion au carbure, Schockwave, 1/2" X 4" X 6"Code BMR 001-902414,98 $ - Ajouter à ma liste de souhaits
MILWAUKEELampe frontale BOLT REDLITHIUM USB pour casque de sécurité, 600 lumensCode BMR 001-8714239,98 $
