L'embout à percussion MILWAUKEE SHOCKWAVE 3.5" Phillips #2 est conçu pour être l'embout le plus durable et le mieux ajusté sur le marché. Les embouts Phillips sont dotés d'un embout de protection contre l'usure pour une résistance accrue à l'usure qui protège l'ajustement pendant toute la durée de vie de l'embout. Les embouts pour visseuses à percussion sont dotés d'une zone de choc optimisée pour chaque type d'embout et chaque longueur d'embout afin d'absorber le couple maximal et d'éviter la rupture. L'alliage 76 est personnalisé et traité thermiquement pour chaque type d'embout afin de prolonger la durée de vie de l'embout, mais jusqu'à 50 fois par rapport aux embouts de la concurrence.
Livraison par colis
Eidt's BMR Express (Arthur)Ramassage en magasin gratuit disponible 7 à 10 jours
Ramassez-le dès aujourd'hui en sélectionnant un de ces magasins*
Des frais de consignation de palettes peuvent être facturés.
*Le prix et l’inventaire des produits offerts sur le site web peuvent varier. Le prix peut diverger d’un prix annoncé en raison de conditions variables dans les différents marchés, d’erreurs ou de situations hors de notre contrôle.
• La pointe de protection contre l'usure protège l'ajustement pendant toute la durée de vie de l'embout.
• L'acier Alloy76 est conçu pour prolonger la durée de vie du bit
• Durée de vie jusqu'à 50 fois supérieure à celle des autres mèches à impact
• L'embout usiné sur mesure Precise Fit empêche le décapage et réduit l'oscillation.
• La trempe au laser de la pointe crée un bouclier de protection externe pour une meilleure résistance à l'usure.
• Géométrie et traitement thermique personnalisés par type d'embout pour des performances optimales sur tous les types d'embouts.
• Taille gravée au laser pour une identification facile
• Conception pour l'utilisation de tournevis à chocs et de perceuses
• Inclut : (1) Embout à chocs SHOCKWAVE, Phillips #2, 3 1/2"
Sélectionner une ligne pour filtrer les commentaires
5 étoilesétoiles
7169
7169 commentaires avec 5 étoiles.
4 étoilesétoiles
701
701 commentaires avec 4 étoiles.
3 étoilesétoiles
63
63 commentaires avec 3 étoiles.
2 étoilesétoiles
10
10 commentaires avec 2 étoiles.
1 étoileétoiles
16
16 commentaires avec 1 étoile.
Note générale
4.9
7472 commentateurs sur 7534 (99%) recommandent ce produit
Évaluez ce produit
Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.
Filtrer les avis
Cote
Paramètre régional
159 to 188 sur 7959 commentaire
159 – 188 sur 7959 commentaire
Trier par :
Les plus pertinents
Tony Montana baby
Torrance, CA
5 étoile(s) sur 5.
Quality product definitely built tuff
il y a 2 ans
I love using these Milwaukee driver bits on my DIY projects around the house. I borrowed some of these from a friend, and they really impressed me so I decided I had to add them to my equipment. Never have Milwaukee products ever failed me. Will continue to support Milwaukee as long as they continue to make quality products.
Nothing can be more irritating than breaking a tool when you need it most! I am in the elevator trade and am constantly using my Milwaukee tools! In the past the tips would break off of the other Phillips bits I used! These Milwaukee bits have outlasted and have stood the test of time to the prior bits I’ve used!
Thank you!
As a military service member and enthusiasts I utilize my milwaukee impact driver bits whenever something needs to get fixed or put together around the house or when working on my vehicles these driver bits are military grade tough and can take a beating just like my other milwaukee tools they are meant to get the job done.
I’ve always hated Philips head screws when I work because I’ve always had them strip out and then they become a pain to remove or I have to start over again but with these bits I never have to worry about the fit or stripping the screws I don’t even need a magnetic tip the screw holds itself. Great buy I use them everyday!
I've been in the electrical trade for years. My go to power tool has always been Milwaukee. They are strong tools that get the job done in pretty much any condition. This bit is no different. Used literally every day and i cant remember the last time I've actually had to replace it. Quality tools everytime, in my opinion.
I use this product on a daily basis and have never found another product that compares to a Milwaukee product but most importantly drills and that being a fuel drill. I’ve owned every made to man and nothing comes close to my Milwaukee- I sleep with this instead of my wife. It never complains and loves me unconditionally.
I am a professional contractor and buy bits in bulk. I tried these and got maybe 1 use out of them if I was lucky. They all break either at the tip or in the shaft. I've tried various lengths and the ALL break on the first use. These are pure garbage. It's beyond me how a name brand company like this can sell such junk.
Hello, thank you for taking the time to review our #2 Phillips SHOCKWAVE™ 1" Insert Bits.We appreciate your honest feedback, and we will share this with our product team, as we are always trying to improve. Thanks- Hannah with Milwaukee Tool
David9303
Metairie,La
5 étoile(s) sur 5.
Milwaukee lives up to its name
il y a 3 ans
I use these & other Milwaukee Driver head bits. They out last any other product that I have bought in the past. I am a Fence & gate contractor so we use a lot of the cobalt metal drill bits as well with the titanium. But the driver heads. Are amazing tough design won’t strip the head won’t round out unless improper use
Plumber by trade for commercial buildings/ shopping centers and these products seem to last the best. Weather drilling in screws through wood or metal framing, these tips don't seem to ever really strip out or snap, very often. Great product that saves money by lasting well over the live span of competition products.
The shock wave Philips bits are an every day tool that makes your life easier, they can be used in all applications from hanging a picture in your house to taking a headlight out of your semi. The nice design of the bit makes a good fit in the screws to make rounding out the heads much Harder to do And there durable.
Milwaukee has the top of the line bit. I use them every day at work and will never buy any other brand. I feel they are sharper,harder, and a more precise fit than any other bits. I've put in enough screws in my life and went through enough bits that I can strongly suggest buying Milwaukee bits over any other bits.
They’re decent bits, however the bits quality is nothing like Milwaukee’s tool quality. The bits hold up decent but Makita’s good bits are tougher and seem to grip that much better. Don’t get me wrong I’m a Milwaukee guy and I only own Milwaukee tools however I do wish these bits were competitive with makita bits.
Hi Nick! We appreciate your feedback on the SHOCKWAVE™ Impact Phillips Bits. Please email us at socialmedia@milwaukeetool.com if you have additional feedback for us. -Cayla with Milwaukee Tool
Tvand
Ankeny, IA
5 étoile(s) sur 5.
Excellent bits and long lasting.
il y a 3 ans
No only does it have the proper grip for everyday screws, it feels secure and solid in the device chuck. I have purchased other brands, but these bits tend to last longer and do not warp as others have for me in the past. I used to buy 10 packs of other brands, but just one of these will do twice the work for me.
I use it to put in and take out Phillips headed screws.
Pros: It puts in and takes out Phillips head screws well.
Hasn’t broken or stripped.
Cons: won’t put in/take out straight blade headed screws or Allen head or star or square or torx or anything else other than Phillips so it’s borderline almost useless.
I have been a general contractor for over 20 years, I have used and worn out a lot of brands of tools in that time. I can say with compleat confidence the name “Milwaukee” means quality. If Milwaukee sold a tune fish sandwich on the internet in July, I would order one without hesitation. Hands down the best.
I buy a pack of these every time I enter a big box
il y a 3 ans
I would recommend this product to everybody! I don't even care if your a DIYer or you're in the trades or you're a Susie homemaker! I really don't care,you definitely need these bits. So stop reading this review and seriously go buy these bits you won't be disappointed that's why I buy them time and time again.
Use varies throughout the day and projects. Just switched over to your Milwaukee line of tools. Working great so far and bits are holding up nicely!
One item that would be nice to see is a bit stronger magnet on the bits. Working outdoors and even inside some times, the magnetic hold just isn’t quite enough.
I mostly use the product at work. As a union laborer. It’s important to have quality tools and that’s exactly what you get with these bits. And anything Milwaukee for that matter. They’re good for just about anything you throw at them. Being commercial or residential work. Would definitely recommend to anyone.
I have used this bit before from the 75 piece shockwave set. Have been a milwaukee user for 11+ years and hope to keep using your tools. Very impressed with the power tools minus the chainsaw. Chainsaw has given me a lot of headache but i’m in the process of getting my issue resolved with the marketing team.
So I decided to stop carrying ALL of it, and carry the one I know Ill use, and will do the job Im on. Im a General contractor and personally work alot with masonry and concrete/brick. Of course the usual residential carpentry, roofing, etc with metal buildings and all the rest. Im not a fan of the 1" or 2 " apexes, they require a bit holder(magnetic or throw it away) and all these seperate pieces simply allows for more trouble, but we all have a 5 gal bucket or so from old sets. That being said Mikwaukee is the only small bit ill keep in the truck, (i keep a set of 6" of all my needed apexes) with the added head speed and recoil on our new impacts theyre simply put the best short bits for bit holders because you wont toss 2 of 5 screws due to that recoil tearing up the head or the Milwaukee bit "skipping" 1out of the head and not turning the screw. Its worth a buck or two, we all know saving money on tools rarely saves one any money on tools in the long run. Good work fellas!
I use these bits on a daily basis and they never let me down. I would highly recommend these over any other brand for fit and durability. I Have a couple of the shockwave bit sets and many of the individual Philips that I bought in bulk but never end up needing because my one original bit just won’t quit!
I use this bit for general use around the house, and have been impressed by its quality and ease of use, the bit attached directly to the driver and worked flawlessly, after several uses I have not noticed that the bit bends or warps in any way which I have had happen with other brand products. Very happy!
I haven't had this very long. It was included with a new drill purchase, and decided to give it a try. So far it's been good, fits the screw heads very snuggly which is extremely important for not having cam out and striping the head. I believe I will purchase a whole set and see if they are all this good.
I use these bits as a sometimes remodeler around the house.
But more often, I'm using them to remove screws from landscape irrigation valves. The bits burrow into the compacted soil that is often lodged in the Philips cross to allow me to extract them in order to rebuild the internal valve components.
So I originally saw this and drooled at the idea of a free thing to destroy, what really intrigued me was the "Wear Guard Tip™" they boasted on the tag. I wanted to test that; so I loaded it into the hammer drill (the one with the removable handle), set it to self tapping screw mode and just pushed the bit against some sheet metal for about 15 seconds, it did nothing from what the naked eye can see. So I decided to step it up and just bore through concrete with just the bit, I made 7 half inch deep holes with this bit and it still fits perfectly into a screw head with no hopping or stripping of any sort. I am beyond impressed, I went into the red green test assuming I'd break it but I still have a perfectly useable bit, I'm still blown away. Only reason I'm not giving it 5 stars is I haven't tested how much turning torque it has because I don't have a rig set up for it (yet). I am 100% buying this variety of bits from now on, I look forward to never unintentionally ruining my bit.
I have a lot of Milwaukee products and I love them
il y a 3 ans
I own a lot of Milwaukee stuff everything is great I would definitely buy everything I own again I have the pack out boxes I got the bags I’ve got all the drill set so I got the impact I have a lot of Milwaukee handtools and I use it all the time every single day of the week I’m using my Milwaukee tools
I got tired of having my bits break while trying to deal with stubborn screws, so i tried the shockwave bits my coworker had and they worked great, so i got my own set. I have been using them for a while now and won't use anything else. The bits keep there edges and i have yet to have one break on me.
I love using Milwaukee drillbits and I wouldn’t use any other bit for the job the bits always hold the screws and they never fall out and I don’t have to worry about constantly stripping the screw I would recommend this to anyone who hates picking up screws off the floor after they fall off your bit.
In the short period of time of used this bit I have already noticed a better engagement than other bits I’ve used, especially with fasteners with less than ideal heads. Seems to wear great and not deteriorate as quick as cheaper bits, will review again after I’ve spent some more time with these bits.
Use the bit to drive screws into decks. Started to get away from using Phillips bits all together but the Shockwave hasn’t stripped the screws. The tip is what is paramount for a Phillips. Plus magnetic tip which hold the screws securely is a must.
Having issue with this site loading all my photos
Voir la disponibilité dans d'autres magasins pour Embout à chocs SHOCKWAVE, Phillips #2, 3 1/2"
Aucun résultat trouvé pour l'adresse ou le code postal saisi.
En stock aujourd'hui en magasin
Inventaires mis à jour le 18 avril à 3:00
Prenez en note que les inventaires ne sont pas affichés en temps réel et qu'ils sont mis à jour quotidiennement. Il est possible que les inventaires aient variés depuis la dernière mise à jour.
DEWALTEnsemble de perceuse/visseuse et clé à chocs, 20V MAX, sans filCode BMR 043-5321179,97 $ 229,98 $
MILWAUKEEScie à chaîne à poignée arrière sans fil et sans balai M18 FUEL, 14" (outil seul)Code BMR 001-8770428,98 $
MILWAUKEEChandail de travail hybride à manches courtes, gris, grandeur X-grandCode BMR 001-923329,98 $
