L'embout à percussion MILWAUKEE SHOCKWAVE 3.5" Phillips #2 est conçu pour être l'embout le plus durable et le mieux ajusté sur le marché. Les embouts Phillips sont dotés d'un embout de protection contre l'usure pour une résistance accrue à l'usure qui protège l'ajustement pendant toute la durée de vie de l'embout. Les embouts pour visseuses à percussion sont dotés d'une zone de choc optimisée pour chaque type d'embout et chaque longueur d'embout afin d'absorber le couple maximal et d'éviter la rupture. L'alliage 76 est personnalisé et traité thermiquement pour chaque type d'embout afin de prolonger la durée de vie de l'embout, mais jusqu'à 50 fois par rapport aux embouts de la concurrence.
Livraison par colis
Eidt's BMR Express (Arthur)Ramassage en magasin gratuit disponible 7 à 10 jours
Ramassez-le dès aujourd'hui en sélectionnant un de ces magasins*
Des frais de consignation de palettes peuvent être facturés.
*Le prix et l’inventaire des produits offerts sur le site web peuvent varier. Le prix peut diverger d’un prix annoncé en raison de conditions variables dans les différents marchés, d’erreurs ou de situations hors de notre contrôle.
• La pointe de protection contre l'usure protège l'ajustement pendant toute la durée de vie de l'embout.
• L'acier Alloy76 est conçu pour prolonger la durée de vie du bit
• Durée de vie jusqu'à 50 fois supérieure à celle des autres mèches à impact
• L'embout usiné sur mesure Precise Fit empêche le décapage et réduit l'oscillation.
• La trempe au laser de la pointe crée un bouclier de protection externe pour une meilleure résistance à l'usure.
• Géométrie et traitement thermique personnalisés par type d'embout pour des performances optimales sur tous les types d'embouts.
• Taille gravée au laser pour une identification facile
• Conception pour l'utilisation de tournevis à chocs et de perceuses
• Inclut : (1) Embout à chocs SHOCKWAVE, Phillips #2, 3 1/2"
Sélectionner une ligne pour filtrer les commentaires
5 étoilesétoiles
7169
7169 commentaires avec 5 étoiles.
4 étoilesétoiles
701
701 commentaires avec 4 étoiles.
3 étoilesétoiles
63
63 commentaires avec 3 étoiles.
2 étoilesétoiles
10
10 commentaires avec 2 étoiles.
1 étoileétoiles
15
15 commentaires avec 1 étoile.
Note générale
4.9
7472 commentateurs sur 7533 (99%) recommandent ce produit
Évaluez ce produit
Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.
Filtrer les avis
Cote
Paramètre régional
129 to 158 sur 7958 commentaire
129 – 158 sur 7958 commentaire
Trier par :
Les plus pertinents
Cbtvbutch
Fargo ND
5 étoile(s) sur 5.
New design destroys all others
il y a 3 ans
When I first started my new job They had the older version of bits and they were about the same all all the other ones out there. But with the new designed bits I love using them they grip screws so much better and hold up to wear so much more. It may sound like it trying to sell you them but trust me these sell themselves once you try them out.
All the Milwaukee products are the best tools out there. I do Solar for a living and I wouldn’t recommend any other tools. This bit in particular is the best due to its shorter length it will fit anywhere to get the job done. It also doesn’t get stripped like a lot of other bits that are produced and it withstands impacts when tools are dropped.
I use the shockwave impact set daily mostly for woodwork and HVAC installs. I’ve never had to replace a single bit due to it breaking or wearing out. I also find that I strip out my screws less often, especially Philips screws, I assume it’s because of the super snug fit in the screw. 10/10, I’ll buy another set once I lose this one inevitably
On the job we are always using our impacts and we all have Milwaukee, the tools and all the attatchments are very nice I have never had a problem with them and would highly recommend Milwaukee to anyone, the shockwave impact Phillips is one of the best for my application it fits all the screws we use and I have never stripped a screw with it
Milwaukee never seems to disappoint! Been very pleased with all of the tools they have to offer. The Shockwave Impact Duty™ Phillips Driver Bit just crushes it with my new M18 Fuel 1/2 drill/driver. No competition as it delivers the most power to get the job done every time. 5 Star rating all day! Don’t delay and buy yours today!! Thank you.
I would buy this product over any other impact bit
il y a 3 ans
I use the product for the electric industry fastening electric screws on motor contractors. I also use this product for installing wood screws on outside projects I have never been disappointed by this product. It seems to last much longer than other impact bits I’ve tried it fits the screws very well and rarely ever slips unless user error.
Almost every day I use Phillips head screws on the job, and I struggled to find a sturdy bit that didn’t spin out the screw or snap the tip, I’ve used almost every head there is, Milwaukee came out with the new Series heads and I’m blown away with the durability they have! I would recommend these to anyone who’s had the same issue mentioned!
Always exceeding expectations. Started with the yellow stuff which lasted 3 months in the agricultural millwright field. My coworkers continually out preformed my yellow tools in that time. I finally got myself the Milwaukee m18 fuel products that I should have spent my money on the first time and I’ve never looked back. Red till I’m dead.
I’ve been using Milwaukee impact bits for quite some time now. I’ve used several different brands and the quality and life of the Milwaukee brand far out does any other brand I’ve used personally. I actually have been so impressed with Milwaukee’s products that I just sold all my Dewalt tools and I’m in the process of buying all Milwaukee.
I've used just about all the bits there is to offer and the milwaukee has stood out the most. When screws are rounded or tough to get to the milwaukee grabs tighter than any other bit. I've been using the same ones for about 3 years now and they still look like the day I bought them and they have some miles on them! Best bit on the market!
As a residential photo voltaic solar energy and renewable resource expert I will never use another brand of Phillips tips or any tips for that matter. This brand has exceeded quality standards in every way imaginable. I will continue to use these products day in and day out 16 hours every day. They will not fail with this high of standard.
I use to think that quantity over quality went for all of my driver bits, but after using Milwaukee’s high torque bits, I can’t image going back to other bits. I work carpentry and have had too man but snap and break mid use. With Milwaukee’s bits, that isn’t a problem anymore and they last months, even with constant use. HIGHLY RECOMMEND.
For decades I had built my stock of tools around Craftsman but the quality had become worse and I was tired of lifetime warranties on tools that last once or twice. I tried Milwaukee bits by my son's recommendation and I end up purchasing the M-18 fuel drill and impact set along bits set and other matching tools. Excellent products so far
I am a Stagehand by trade and a hobby woodworker. I switched from using only Dewalt bits to the Milwaukee Shockwave about 9 months ago. I have spent a considerable amount less in replacing bits. This amount has been so impactful on the tool budget that I am able to purchase M12 product line that I have been eying with the leftover funds.
I have used just about every make and model of drill bit you can think of in my 25 years of being a carpenter. There isn't a single bit on the market that can compare to Milwaukee #2 bits. Of course no bit will last forever, but good drill technique will keep these going a lot longer than the others. Definitely the only brand I buy now.
I'm a elevator mechanic apprentice, and I've started buying my own tools to build my gear up. So I decided to take the dive and go with Milwaukee, and I couldn't have been happier. From the bits, to the grinder. Everything has done its job over any expectations I could had. So once again thank you for making my trade easier!
Chris A.
Always didn’t think about the screw tip as much and would buy any brand that seemed like a good deal. Had my doubts even though promoting the screw tip and it’s surprised me how well it’s held up so far.
Has been used on 2 jobs so far and still going. Might buy a pack of the shockwave bits. Seem to be stronger that the ordinary bits.
So far the bit is working as expected and has sustained no damage (which is more than I can say of bits I have from a major competitor). It’s still too early to be 100% confident that it will continue to hold up for the long term, so I can only give it 3 stars. If it continues to perform, I’d be willing to give it 5 stars…we’ll see.
Hello, thank you for your feedback on your bits. We have passed your feedback along to our product team. If you have any additional feedback please feel free to email us at socialmedia@milwaukeetool.com. Thank you- Social Team
Jridley7
New Jersey
5 étoile(s) sur 5.
Milwaukee Tool Bits are the best and most reliable
il y a 3 ans
The Mke Tool- Shockwave Impact Phillips Bits are the best around. They can last weeks, even months when used correctly. You will save tons by buying these bits over any other in the tool industry, Milwaukee just does it the best, they barely even strip the nails, making them easier to use. They are long lasting, and wont let you down!
Within the recent year getting into plumbing I know I had to update my old ryobi stuff to Milwaukee, due to age and condition Milwaukee is a brand that is as tough as some of the jobs I come across and these shockwave bits are no exclusion to that quality of their name and service to many blue collar jobs. Keep up the great work guys
I have used these hammer and impact drivers working with my dad on all sorts of residential electrical jobs and they have never let us down. They can take a real beating and they always hold a charge with lots of power and torque. I finally bought my own driver and impact combo (M18) and cant wait to see what else I can accomplish!
Milwaukee shockwave bits are my preferred bits when having to mount boards for shower heads or moving studs for pipe. I bought a kit with several and after putting many screws into wood it still looks good and shows no major wear. Pair these with a Milwaukee impact driver or your favorite impact and they’ll be well worth the money.
You know when you’re using an impact and it just runs through all these bits you have? You know when you’re trying to screw something in and the bit just doesn’t fit the screw right? Well look no further! Milwaukee shockwave bits are the greatest! They do anything you want it to do. All good for professional and amateur level work.
I work in construction and go through thousands of screws across each job, but only need one bit when it's made by Milwaukee, nothing else I've used stands up as strong and lasts as long as their tools and accessories. If you need a quality product with excellent fitment that won't strip fasteners, Milwaukee bits are the way to go.
I use this baby running out some bad mo suckin screws. I’m talkin rusted self tappers that ain’t seen daylight in thirty years fellers. This baby bit right into the side of that Philips head and she cranked. CRANKED!!! Boys I’m tellin you get you some of these baby’s. It takes runnin it in dry to a whole new level I tell you what!
I am a commercial electrician and as such we drive in 100's of self tappers a day. After using all the bits on the market I find that the Milwuakee ShockWave bits are BY FAR the best. I use one to two of the other guys bits a day where as the Milwaukee bits will last for about a week before I have to change them, 1000's of screws.
I work in the overhead door business and use Milwaukee power tools regularly. I’ve been buying other Milwaukee tools just out of convenience. I’m really satisfied with how the Shockwave Phillips bit fits into the screw head with less slipping and stripping. Also, the tip is less prone to breakage that I’ve seen in other brands.
I use this tool to install hvac everything is great I have zero complaints . I’ve always been a freaky guy my whole life and I don’t know why I decided to switch to Milwaukee’s tools but I am glad I did! They are so much more compact and better then. Dewalt ! Not to mention that red and black color scheme is just down right sexy !
Formerly a diehard customer of a rival brand which I will not mention, I was in need to replace the old batteries. Instead I chose to try out Milwaukee from a friend’s recommendation. I couldn’t be happier!!! The torque, the battery life, ergonomics, etc… made me a believer. I complete projects more efficiently with less fatigue.
Have been slowly rebuilding my tools and am now strictly Milwaukee. These bits have a great life and because these tend to be of common use, when you buy a shockwave pack for bits they come in a case with several of these. Definitely a good buy. Most of my maintenance guys at work also opt out for Milwaukee... can't go wrong.
Voir la disponibilité dans d'autres magasins pour Embout à chocs SHOCKWAVE, Phillips #2, 3 1/2"
Aucun résultat trouvé pour l'adresse ou le code postal saisi.
En stock aujourd'hui en magasin
Inventaires mis à jour le 30 mars à 3:00
Prenez en note que les inventaires ne sont pas affichés en temps réel et qu'ils sont mis à jour quotidiennement. Il est possible que les inventaires aient variés depuis la dernière mise à jour.
BLACK & DECKEREnsemble de perceuse/visseuse, BLACK+DECKER, sans fil, 3/8", 8 V, 43 morceauxCode BMR 066-363259,98 $
MILWAUKEEAspirateur sans fil M18 FUEL PACKOUT, 2,5 gallons, au lithium-ion, 18 VCode BMR 001-8858279,98 $
MILWAUKEEChandail de travail hybride à manches courtes, gris, grandeur X-grandCode BMR 001-923329,98 $
MILWAUKEEScie à chaîne à poignée arrière sans fil et sans balai M18 FUEL, 14" (outil seul)Code BMR 001-8770428,98 $
