Livraison par colis
Clé à chocs sans fil sans balai M18 FUEL 18 V lithium-ion, anneau de friction, couple élevé, 3/4"
Code BMR
001-8758
Numéro d'article
2864-20
UPC
045242502332
Clé à chocs sans fil sans balai M18 FUEL 18 V lithium-ion, anneau de friction, couple élevé, 3/4"
La clé à chocs à couple élevé sans fil la plus compacte de l'industrie à 8,59 po L, cet outil permet un meilleur accès dans les espaces restreints. L'intelligence REDLINK PLUS prévient les dommages causés à l'outil et à la batterie par une surcharge ou une surchauffe. Les batteries REDLITHIUM fournissent plus de travail par charge et plus de travail pendant toute la durée de vie de la batterie. Compatible avec ONE KEY, c'est la première clé à chocs à couple élevé de l'industrie qui se connecte sans fil à un téléphone intelligent pour personnaliser, suivre et gérer les performances et la localisation d'un outil.
Centre de Rénovation G. Doyon (Bromont) Ramassage en magasin gratuit disponible 7 à 10 jours
*Le prix et l’inventaire des produits offerts sur le site web peuvent varier. Le prix peut diverger d’un prix annoncé en raison de conditions variables dans les différents marchés, d’erreurs ou de situations hors de notre contrôle.
• Le moteur sans balai Powerstate fournit un couple de fixation pouvant atteindre 1 200 pieds / livres et un couple de serrage de 1 500 pieds / livres
• L'intelligence Redlink Plus permet d'éviter les dommages causés à l'outil et à la batterie par une surcharge ou une surchauffe
• Les batteries REDLITHIUM fournissent plus de travail par charge et plus de travail pendant la durée de vie de la batterie
• Compatible avec la clé unique : personnalisation, suivi et gestion des performances et de l'emplacement des outils
• Possibilité de basculer facilement vers 4 profils de performance personnalisés qui peuvent être enregistrés dans la mémoire de l'outil
• La conception de l'anneau de friction permet de changer de prise rapidement et facilement.
• Le surmoulage en caoutchouc de qualité supérieure résiste aux matériaux corrosifs et offre un confort accru lors de l'utilisation.
• Une lumière DEL pour éclairer la zone de travail
• Comprend : Clé à chocs M18 FUEL ONE-KEY de 3/4 de pouce avec anneau de friction (2864-20) (batterie et chargeur vendus séparément)
| Marque de commerce | MILWAUKEE |
|---|
Évaluations
Filtrer les avis
Cote
Paramètre régional
9 to 38 sur 368 commentaire
9 – 38 sur 368 commentaire
Les plus pertinents
RichTheGreat
Buffalo NY
4 étoile(s) sur 5.
Quality tool
il y a 2 ans
I have a lot of Milwaukee M18 & M12 cordless power tools some work great 90% of the time, It's the really expensive ones that give me the most trouble either the battery contacts turn black from poor alignment or the trigger seems to just stop working, When you take them to be serviced they want you to pay a labor charge for fixing a manufacturing defect. Would I recommend these tools to a friend yes but I would recommend they buy the cheapest combo kit so when they stop working there cheap enough to replace.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Jrod1891
SexeHomme
4 étoile(s) sur 5.
This thing is a beast but....
il y a 5 ans
I work on a drilling rig and I absolutely love this thing and I’ve been using it plus other Milwaukee impacts over the years with my job! Insane amount of torque and it very rarely has any issues busting any nut loose but my only suggestion would be that Milwaukee needs to put some kind of water resistance on these things. The only thing that keeps me and my guys going back to air is that in our line of work, it’s hard to keep any kind of fluid out the tool and that’s the only thing that kills them
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
RobertM
Taber, ab Canada
SexeHomme
5 étoile(s) sur 5.
Air no more!
il y a 5 ans
I was a solid believer in air tools! Until I used the Milwaukee M18 1/2" High torque impact. Just the fact the I had nothing but torque and power every time I snapped that trigger. I work in the al era oilfield, I use my tools allday, everyday. We work in hot and cold weather. Our tools take a beating, and these tools constantly perform. Would recommend to every industry worker around. Spend the money, and make the change. You will not regret this purchase.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Fivestepsdown33
Hagersville Ontario
3 étoile(s) sur 5.
Warranty doesn’t stand up to the tool
il y a 4 ans
I am a structural steel contractor. We use this tool to fasten 3/4” anchor nuts to place the steel columns at time of installation .
After 4 months of use the casing cracked and 2 of the screws used to hold the casing together sheered. This tool was not being misused or dropped.
I sent it for repair and ended paying out of pocket for the expense. If your going to advertise for use in construction I think Milwaukee should back the warranty a little more
Traduire avec GoogleNon, Je ne recommande pas ce produit.
Affiché initialement sur milwaukeetool.com
Réponse de milwaukeetool.com :
il y a 4 ans
Digital Care
Hello, thank you for taking the time to review our M18 FUEL w/ ONE-KEY High Torque Impact Wrench 3/4" Friction Ring Bare Tool. We are sorry to hear about your frustrations, but will be in contact shortly via email to help provide support. Thanks- Hannah with Milwaukee Tool
Trevor Q
Davidson SK Canada
3 étoile(s) sur 5.
Hard hitting impact, one key seems to have issues.
il y a 3 ans
This is a super powerful impact. Doesn't get used all the time but when she does she performs. Although one day the "onekey" quit. Impact would run but it was stuck permanently in bolt removal mode. The impact had to go into the repair center. Sat there for probably 2 months until they called and said they had gave me a new impact. The new one I have recieved back hasn't skipped a beat but its only been in my hands for about a month....
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Réponse de milwaukeetool.com :
il y a 3 ans
Customer Service
Hi Trevor! Thank you for telling us about your experience with the M18 FUEL™ w/ ONE-KEY™ High Torque Impact Wrench 3/4" Friction Ring Bare Tool. Please email us at socialmedia@milwaukeetool.com if you would like additional assistance. -Cayla with Milwaukee Tool
Creepingdeer1
Lake erie
5 étoile(s) sur 5.
Twice the power, save your air
il y a 2 ans
For the money, just buy the 3/4. It definitely makes a difference. The power to take stuff off is remarkable. Its not as heavy as i thought it would be. After first charge, they charge quickly. One key isnt that hard to do. Nice fence perimeters for it also. One key should of just been for pros tho. Seperate the homeowners from commercial guys. I absolutely love the hard case it comes in. As for the warranty, thats a big ouch.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
EJD613
Searsmont, ME
5 étoile(s) sur 5.
Right tool for the job
il y a 2 ans
We needed to remove a total of 1064 1-3/8" plugs on a large industrial gas cooler for inspection, mind you these units have been in service, outside and untouched for 14 years since construction. This impact made quick work of the process. We originally tried doing it with a breaker bar when we were only going to remove 104 plugs, that was not going to work so we bought this (two actually). This is the right tool for the job.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Chopper chuck
East coast
5 étoile(s) sur 5.
My favorite impact
il y a 3 ans
This is my favorite impact gun. It’s light enough that I can use it for quite a wile before my arms get tired. It has enough torque to remove most everything I deal with daily. Usually if I run into something this gun can’t remove. I jump straight to a 1inch air impact. I have a 3/8 gun that never gets used, and a 1/2 impact that I use every once in a while. The 3/4 gun is my daily driver and it rarely disappoints.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
JaredZ
Hamilton, ON
5 étoile(s) sur 5.
Stands the test of time
il y a un an
I can't begin to say enough about this impact gun. I'm a millwirgh at a major recycling company and it's safe to say we put our tools through the harshest of conditions. Everything from grease and oil to rain and the coldest of snow. And time and time again the milwaukee 3/4 impact gun out performs our 3/4 and even 1 inch drive air impacts. If you are even thinking about buying this I would highly recommend it.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Black Stack
Alberta Canada
SexeHomme
5 étoile(s) sur 5.
Best impact I have ever owned
il y a 5 ans
I bought this as an alternative to running my compressor in my heavy duty service truck. It not only does what my pneumatic impact can do but saves the time it would take to unreel hoses and fire up the compressor. Not to mention I can lock it out when not in used and gps track it! I ended up buying a whole fleet of Milwaukee tools. 1/2” impact, grease gun, hammer drill and impact driver and more to come.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Tomtire
5 étoile(s) sur 5.
Great gun , I have three total. Use every day!
il y a 6 mois
Great product bought two of them for work. One for service truck and one for my toolbox. I replace tires on heavy trucks with them. 500 flbs no problem! Rubber cover from 1/2 inch gun is a must to keep them looking good and not damage casein lugs and studs. I do a lot of work on the side of the road one key works well. Just sent the one I bought last year in for cracked nose cone. ( no rubber cover).
Traduire avec GoogleAffiché initialement sur milwaukeetool.com
ChrisSto
Fort McMurray, Alberta
5 étoile(s) sur 5.
Takes some heavy abuse and keeps on hitting
il y a 3 ans
This Impact is being used day after day in heavy industrial use. Product works great and performs no need to string out and trip over air lines and hoses. We have bought several impacts over the last several years, worn a few out but still have no issues buying more given how well they perform. One thing that could be improved upon would be the battery connection as that tend to be the first to fail.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Anonyme
4 étoile(s) sur 5.
Busted drive heads, slow customer service
il y a 3 ans
These impact tools are great but in our line of work, we own 17 but we have had several break down
Basically the entire drive head breaks off tool. Some are a warranty issue and thankfully replaced by Milwaukee. We’ve had three sent sent out for repair back in June and so far only have heard of one being warranteed and replaced. However,,, we still do not know the status of the other two
Traduire avec GoogleAffiché initialement sur milwaukeetool.com
Bob-by
Toronto
2 étoile(s) sur 5.
A Sunday gun.
il y a 4 ans
I'm a ironworker (structural) face connection like 2 plate together i wil give 4 star.a knife connection 3 star (5amp battery) need to finish torque by hand. For light duty changing tire ect is ok if you put it intense service he will died on you after few min. Now I need to find a place to repair...i wish is only the switch r/f the problem . For trucker, mecanic yes.
Fiability no.....
Traduire avec GoogleNon, Je ne recommande pas ce produit.
Affiché initialement sur milwaukeetool.com
Chris713
Valdosta, ga
SexeHomme
5 étoile(s) sur 5.
King of the block!
il y a 6 ans
I work in an extrusion facility, everything we work on has to have outstanding torque. Ex. nuts, bolts etc.
On an average day we use 3/4" & 1" pneumatic air guns. Until NOW! This Milwaukee 3/4" impact is a beast. We tested it against every impact at our shop, the 1" pneumatic gun couldn't even take loose the nut I tighten with the Milwaukee.. Must have tool....
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
M. Sanford
South GA
5 étoile(s) sur 5.
Beast!!
il y a 3 ans
This thing is a beast! So far so good and meeting my expectations. I use this on the farm handling large fasteners on tractors and other equipment where a 1/2" drive is just not enough and it makes quick work of them. Havnt had it very long so the real test is yet to come and this will be updated accordingly. Its looking positive as of right now though!
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Dave St
Qld Australia
SexeHomme
4 étoile(s) sur 5.
If your doing short bolts excellent.
il y a 6 ans
I've recently upgraded from my very early brushed units. I use them on all sorts of gear , mainly agricultural & while excellent on short bolts , long bolts with nuts that tend to be stuck after a few years of service tend to just flex. Perhaps the angle of torque duration needs to be increased to overcome the flex. But otherwise an excellent product.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Pipeline666
Lincoln, NE
5 étoile(s) sur 5.
I have bought this product time & time again
il y a 3 ans
We are a utility contractor installing water and sewer lines. The 3/4" impact wrench has the power required to torque down nuts and bolts consistently. The only downfall of the tool is it isn't waterproof....but then again, what power tool is. Excellent product, however, you will need a higher output battery for extended use and they are pricy.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Mikeburrito
Milwaukee, WI
5 étoile(s) sur 5.
Does a great job.
il y a un an
It's got the juice to do the high torque application that I need. I work on Transit vehicles and I got it specifically for tires. Asides from getting a little hot, it has no issues taking lug nuts off without missing a beat. Plus, with the app, I was able to play with it for a little bit and dial it in to almost exactly 450 ftlbs.... Every time.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
CParr
Marsing Idaho
SexeHomme
5 étoile(s) sur 5.
Awesome tool!! Highly recomend
il y a 5 ans
The 3/4" is a bit smaller than my 1/2" Fuel impact, a bit heavier but that is expected. This thing is a monster. I have not found a fastener it would not free. I have not yet had the chance to try it on the front axle nut on a Dodge where I have had to use a 4' cheater pipe yet, I suspect it will not be much of a issue with this beast.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Rob89
Minnesota
SexeHomme
5 étoile(s) sur 5.
Must have for for DIY projects, car repair,and eve
il y a 5 ans
I needed something that could take off rusty seized on bolts so the 3/4 impact did the job and some so if you need high torque and the control this is the tool for you highly highly recommend for anyone's tool box or even a emergency tool in your truck also got a 3/4 to 1/2 impact adapter not the cheap one's either they will break!!!
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
CamH
Wisconsin
5 étoile(s) sur 5.
3/4” Cordless M18 Impact Wrench with friction ring
il y a 2 ans
The 3/4” drive friction ring cordless impact with one key is an amazing tool. Claiming up to 1,500 foot pounds of torque. It is an extremely helpful and capable tool in the shop. Great for the nuts and bolts that nothing else can break loose. Saves the body tremendously as well in the long run. Great tool and great Job Milwaukee!
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Tom H
Calgary AB
4 étoile(s) sur 5.
I'm a big fan of the milwaukee tool family
il y a 3 ans
I use the milwaukee 3/4 impact all over the shop, when our 1/2 doesn't cut it anymore, I always grab the 3/4. The high torque output is second to none. I would recommend this tool to everyone in my line of work, we are a welding and repair shop so old rusty bolts are our business, and the M18 3/4 impact works great for us.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Bill97
3 étoile(s) sur 5.
Decent tool, but save your money.
il y a 6 mois
It's fine, 3/4 Ingersoll air is still far better, we have to replace this one often and it's only ever really used for 480lb/ft lug nuts. It handles them better than the 1/2, but in this bigger territory air is still king.
The convenience of electric is nice, but it doesn't have the longevity that air does yet.
Traduire avec GoogleAffiché initialement sur milwaukeetool.com
F C E
BC Canada
4 étoile(s) sur 5.
Good cordless impact
il y a 3 ans
Overall it is a good impact. Only downside is it was advertised as having customizable torque settings and it does not. You can customize the speed, ramp up time, light, and what they call precision mode. When asking their tech support how that translated into ftlbs of torque i was told it really doesn't.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Music City Construction
Nashville, TN
5 étoile(s) sur 5.
Beast of an impact
il y a 3 ans
This impact is better than any electric impact I have used and better than most air impacts. It is a beast and easy on batteries. I do Ironwork and use it almost every day on 3/4" or larger bolts. I had the 1/2" high torque Milwaukee impact and the anvil broke so I bought this 3/4" and so far, so good.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
ChiefBob
College Station, TX
5 étoile(s) sur 5.
Very powerful and versatile
il y a 3 ans
This is one powerful impact wrench. I keep a 3/4" to 1/2" adapter on mine all the time because it meets most of my needs. But it is great to get the 33mm 3/4" drive socket out to pull the wheels off my big motorhome. The ability to set power and speed makes it great for less rigorous, every day tasks.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
AdrianErazoCardona
Miami Florida
5 étoile(s) sur 5.
I love this tool
il y a un an
Is an interesting tool that has truly impressed me. It combines solid performance, minimal noise, and exceptional reliability, making it a standout choice for various projects.
Performance:
This drill is a powerhouse. It effortlessly handles various materials with its adjustable speed and torque settings. Whether I'm drilling through wood, metal, or concrete, it delivers consistent and efficient results.
Is its quiet operation. It's a game-changer for those who want to work in a peaceful environment. No more deafening noise during your projects.
Reliability:
This drill feels sturdy and durable. Its ergonomic design reduces fatigue during long sessions, and the battery life is impressive, ensuring uninterrupted work.
In summary, this impact wrench is a reliable and versatile tool that's perfect for DIY enthusiasts and professionals alike. Its outstanding performance, low noise, and unwavering reliability make it a top choice for any project. Give it a try; you won't be disappointed!
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Rust Belt Garage
Xenia, Ohio
5 étoile(s) sur 5.
Beast Impact!!
il y a 2 ans
So far it works great like it should. It’s plenty powerful to bust bolts and lug nuts loose. The only complaint I have is the price. It’s a bit expensive but that being said all of the other brands with a large impact like this are too. I would definitely recommend it to someone else to buy.
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
Redbull3
Ontario, canada
5 étoile(s) sur 5.
Powerhouse!
il y a 4 ans
At work this impact is my best friend, tons of power and 100 times better then any 3/4 air impact I’ve ever used. i use a 9ah battery and it gets me threw a 10 hr shift with no issues and the one key is a great way to keep track of your tools, wish they had it on every tool Milwaukee made
Traduire avec GoogleOui, Je recommande ce produit.
Affiché initialement sur milwaukeetool.com
9 – 38 sur 368 commentaire
Vous pourriez aimer :
- Ajouter à ma liste de souhaits
DEWALTEnsemble de perceuse/visseuse et clé à chocs, 20V MAX, sans filCode BMR 043-5321179,97 $ 229,98 $
Complétez avec :
- Ajouter à ma liste de souhaits
MILWAUKEERadio de chantier-Chargeur sans fil M18, Bluetooth, au lithium-ion, 18 VCode BMR 001-8800329,98 $ - Ajouter à ma liste de souhaits
MILWAUKEEGants de travail d'hiver isolés à protection anti-coupure de niveau 1 – grandeur X-grandCode BMR 001-92239,98 $ - Ajouter à ma liste de souhaits
MILWAUKEELames de scie à ruban à coupe fine pour métaux extrêmes, 30 9/16", 12/14 DPP, 3/pqtCode BMR 001-919832,98 $ - Ajouter à ma liste de souhaits
MILWAUKEENiveau numérique REDSTICK avec technologie de mesure PINPOINT, 24"Code BMR 001-9484369,98 $
