Donnez du style à vos évents muraux à l’aide d’une solution moderne. Nous avons repensé les évents à grille et leur avons donné l’aspect d’une simple conduite d’air rectangulaire. La bordure de cloison sèche encastre l’évent dans la mur, pour qu’elle se fonde dans le décor. Installation professionnelle nécessitant un enduit de plâtre pour cloisons sèches. Un projet de fin de semaine parfait pour rehausser l’apparence de ces éléments. Uniformisez tous les évents de votre maison, peu importe leur emplacement et le matériel de la surface qui les entoure. Des modèles d’évents de plancher sont aussi offerts.
Livraison par colis
Eidt's BMR Express (Arthur)Ramassage en magasin gratuit Service non disponible
Livraison par camion BMR
*Le prix et l’inventaire des produits offerts sur le site web peuvent varier. Le prix peut diverger d’un prix annoncé en raison de conditions variables dans les différents marchés, d’erreurs ou de situations hors de notre contrôle.
• Fixez-le au mur ou au plafond, puis peinturez ou recouvrez d’un papier peint assorti à votre décor.
• Facile à installer en tout temps!
• L’évent demeure ouvert en tout temps.
• Ce modèle ne possède pas de registre de contrôle de débit d’air.
• Le débit peut varier selon la configuration de votre système CVC.
• Design breveté.
• Fabriqué avec fierté au Canada.
• Ce modèle est conçu SEULEMENT pour les évents muraux.
• Des modèles pour évents de planchers sont aussi offerts.
• Nettoyage : retient moins de poussière qu’un évent à grille.
• Facile à enlever pour le nettoyage.
Sélectionner une ligne pour filtrer les commentaires
5 étoilesétoiles
38
38 commentaires avec 5 étoiles.
4 étoilesétoiles
5
5 commentaires avec 4 étoiles.
3 étoilesétoiles
2
2 commentaires avec 3 étoiles.
2 étoilesétoiles
1
1 commentaires avec 2 étoiles.
1 étoileétoiles
1
1 commentaire avec 1 étoile.
Note générale
4.7
28 commentateurs sur 31 (90%) recommandent ce produit
Évaluez ce produit
Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.
Filtrer les avis
Cote
Paramètre régional
9 to 38 sur 47 commentaire
9 – 38 sur 47 commentaire
Trier par :
Les plus pertinents
Mike
Kelowna
Âge35 à 44 ans
SexeHomme
2 étoile(s) sur 5.
Mostly garbage product but looks good
il y a 5 mois
Mounting screws are garbage, make it hard to level, and don’t screw in easy. Worst thing is there is no damper and the one sold needs to be mounted behind so now I’d have to unscrew the whole thing to adjust flow. I’d say this is mostly a garbage product. Who sells a vent without a damper?
Thanks for your feedback regarding our product. The screws are designed in mind to keep a low profile so that they won't protrude too far out. It isn't mandatory to have controllable dampers with vents. Some systems already have built-in dampers in their duct work/system. Because of that, they wouldn't need a vent that has a damper. Which is why we created this type of product. You can attach our Lite Damper product to the back of the vent and if ever you need to open or close the dampers, you can remove the center tray to access them. You wouldn't need to unscrew the body of the vent every time to access the dampers.
Kelly
5 étoile(s) sur 5.
A world a difference
il y a 3 ans
I installed these in under 5 minutes and they make a world a difference. They come in packs of 3 and I only needed two, so I just gave one away to my neighbour and now they're also hooked on Aria Vent.
Great customer service, delivery was fast. Just overall wonderful experience.
I installed these in under 5 minutes and they make a world a difference. They come in packs of 3 and I only needed two, so I just gave one away to my neighbour and now they're also hooked on Aria Vent. Great customer service, delivery was fast. Just overall wonderful experience.
I will say, for something that you aren't going to be replacing for years, you might as well go for something that looks great. I'm very happy with my vent and I'm glad I got them. It gives a nice finish more interesting and polished than the average ceiling vent.
[This review was collected as part of a promotion.] I absolutely love all of the Fittes vents we installed during our remodel. They look 1000% better than the average vent. I also have been pleasantly surprised by the airflow. My only complaint is that they don't have a black frame option that's 12x12.
Great looking product. Unless your builder cut your opening perfect. It does not have enough trim around the out edge. It need about 1 inch add all around to the out of trim to hide the horrible cutting job buy builder. Not the product fault.
These vents are beautiful! They were relatively easy to install - we had a minor issue because of the way our ducts were installed but figured it out. The only issue is that they don’t have more sizes otherwise they are perfect!
The vents are cool and look better than the regular louvered vents. There is no control of the air flow however unless you buy clip on dampers, and I wish they were offered in more sizes (like 6" tall).
Overall nice vents!
All in all not bad. The unit can use a wider framing as it left so much gap and rough paint from removal of old vents. It required a painter to come back and finish off with caulking, patching and some paint.
Thanks for your feedback! We'll forward this to our product development team for consideration!
DAVID ISENBERG
Charlotte, North Carolina, United States
5 étoile(s) sur 5.
Fantastic
il y a un an
We love these products and use them quite often on our renovation projects. We always look forward to their new and innovative products that help us stand out from the competition. Thank You FITTES!
We have installed both floor and ceiling vents. The floor vents match our wood floors. Everybody that sees them comments on how the look. Great innovation in a category that needed disruption!
Great Concept. Execution needs tweaking. It would be great if installation were a simple swap out of a standard size grill.
There is a mud-in unit for those who are doing new construction. They can be any size because: it's new construction. The framed units however are ideal for retrofit, but it would be nice if the frame size were the same as traditional grills - pull the old, place the new. As is, the grill frame needs to be modified to remove the ears, so they don't stick outside of the frame and then the walls need to be patched before installation and painting.
A 6x10 grill, for example, typically sits centered between the studs - which are 2-1/4” outside the opening, so there's nothing to screw into as shown in your instructions. That’s ok though because there’s no reason not to just glue/tape the vent in place.
Access to the duct can be had by simply taking the face plate off.
Properly sized units with a slightly wider frame would make the installation process a breeze.
Units designed to current industry standards are a simpler solution, one that works even for the DIY challenged.
Beautiful vent! Flows the same amount of air as my old ugly louvered metal vent did. They hold paint nicely, fit perfectly. and are trivial to install. The look is unrivaled, nice and clean!
Awesome look, no fuss, placed and keeps itself in place. Fits like a glove and distributes the air from a ceiling vent so its not blowing directly down on someone or one spot.
[This review was collected as part of a promotion.] All items seemed well constructed. Extruded plastic with slight texture in design shall help in holding paint on product. Unit fit the cold air return frame snug.
We are an interior design company, and we use aria vents in all of our projects. They are beautiful, simple, and our customers love the finished look of the vents!!
[This review was collected as part of a promotion.] I'd recommend this product. We were redoing our kitchen island and really wanted to get rid of the metal vents and hide that there were vents as much as possible.
[This review was collected as part of a promotion.] We built a bar shelf and the fin-style vent did not compliment the shelf. It looked obnoxious. Replaced with Fittes and it Looks great. Fit well. Designer style.
[This review was collected as part of a promotion.] Love the way they look, although not simple in how they should be installed. Ended up gluing them to the box vs screwing them into the drywall.
Thank you for your feedback on our Framed Wall Vent [Lite]. All of our products are manufactured here in Canada with the highest quality of materials and we're sorry to hear that it didn't meet your expectations. Your input is valuable to us and we'll pass it along to our product team.
In the meantime, we invite you to explore other products on our website that might better suit your needs, we have our Luxe collection that has products made of powder coated steel. We're confident you'll find something you love! If you need any recommendations or assistance, reach out to us at support@fittes.com.
Beth
5 étoile(s) sur 5.
Want all my wall grates to look like this!
il y a 2 mois
(This review was collected as part of a promotion.) Looks great, easy to install, finishing touch on newly renovated kitchen-looks so much better than original grate!
Aucun résultat trouvé pour l'adresse ou le code postal saisi.
En stock aujourd'hui en magasin
Inventaires mis à jour le à
Prenez en note que les inventaires ne sont pas affichés en temps réel et qu'ils sont mis à jour quotidiennement. Il est possible que les inventaires aient variés depuis la dernière mise à jour.
km
Contactez votre marchand pour connaître la disponibilité