Dock accessories

Always keep your boat close to the dock with this galvanized dock cleat.

This Galvanized Hex Bolt Kit is ideal for assembling and reinforcing aluminum dock systems. This 12-piece kit includes hot-dip galvanized hex bolts with oversized flat washers that evenly distribute stress and protect the dock float flange from damage. Designed specifically for aluminum structures and polyethylene float edges, the components prevent crushing and maintain dock integrity. Ideal for marine environments, this bolt and washer kit is easy to install and provides long-term durability in harsh waterfront conditions.

This set of high-quality stainless steel Truss Head Screws is ideal for securely installing dock accessories and PVC dock bumpers. Each pack contains 100 durable screws featuring a large, round truss head for better surface coverage. The Robertson (square) drive provides a reliable grip during installation, reducing slippage and stripping. These stainless steel screws are corrosion-resistant and will not create rust stains, providing a clean and professional finish for all your outdoor projects.

Protect your moored boats from dock damage with the BIG "D" Dock Bumper. This premium pack includes five, 8-ft dock bumpers, built from high-quality white vinyl. These durable bumpers resist saltwater, UV rays and mildew for long-lasting protection without marring your boat. Easily installed on most docks, they're a convenient choice for boat owners seeking a low-maintenance solution. Ideal for harsh marine environments, this essential dock accessory offers reliable performance and a clean, sleek appearance.

The Galvanized Dock Leg Pile is built to anchor your dock system securely to the shore. With a 1-11/16-in outside diameter and 0.10-in thickness, this hot-dip galvanized steel pile resists corrosion and fits most leg holders, including those for Multinautic aluminum docks. It pairs with base plates (sold separately) to prevent sinking on soft ground, offering a stable foundation in various conditions. This 3-ft pile is Ideal for both residential and commercial dock installations.

This 4-step aluminum Dock Ladder is designed with deep 5-1/2-in angled steps to safeguard your climb. Constructed from marine-grade aluminum, it's ideal for use in freshwater environments. The ladder features smooth handrails and a straightforward assembly process. Its innovative J-hook mounting system allows for effortless removal and installation, making it perfect for both aluminum and wood docks. Made in Canada, this essential dock accessory provides a secure and stable means of access for any dock owner.

This corner plate provides strong reinforcement for dock joints or framing corners in wooden dock sections. Made of 1/8" thick hot-dip galvanized steel, it enhances structural integrity in high-stress areas. The slotted 9/16" x 1" holes and 3 1/2" vertical spacing between centres ensure compatibility with standard layouts. Built to resist moisture and corrosion, it’s a reliable solution for docks exposed to water and weather.

Ideal for securing dock posts or anchoring chains, this galvanized clamp offers flexible use with both fixed and floating dock systems. Its long U-shaped sleeve holds posts firmly while still allowing quick height adjustments to accommodate water level changes. Compatible with 2" pipes and 5/16" chains. For added strength, install with corner brackets or reinforcement plates.

This stainless steel mooring ring is designed to securely fasten small watercraft to the dock. The lag screw installation ensures both strong and lasting attachment, while the 2-inch inner diameter easily accommodates a rope or chain. Corrosion- and moisture-resistant, it’s suitable for long-term outdoor use, whether in fresh or saltwater environments. A practical and reliable solution for configurations where space is limited.

Designed to resist corrosion and withstand harsh weather conditions, this 6-foot galvanized post can be used vertically or horizontally. With an outer diameter of 1 11/16 in. and a wall thickness of 0.14 in., it is suitable for various types of temporary or permanent structures in humid environments. Compatible with several accessories, such as base plates or protective caps, it integrates easily into a wide range of outdoor projects.

The Screw-Mount Nylon Dock Cleat offers a compact, durable solution for secure mooring. Measuring 8-in, this lightweight cleat is built with high-quality nylon to resist corrosion, UV rays and tough marine conditions. Its screw-mount design allows for quick, easy installation on docks, making it ideal for small boats and personal watercraft. Featuring a versatile black finish, this marine cleat provides dependable performance with a modern low-profile look. 

The Screw-Mount Nylon Dock Cleat offers a compact, durable solution for secure mooring. Measuring 4-1/4-in, this lightweight cleat is built with high-quality nylon to resist corrosion, UV rays and tough marine conditions. Its screw-mount design allows for quick, easy installation on docks, making it ideal for small boats and personal watercraft. Featuring a versatile black finish, this marine cleat provides dependable performance with a modern low-profile look. 

The Boat Ramp Hardware "E" Kit is a comprehensive kit designed for constructing a sturdy wooden mooring ramp frame. This set includes joist corners, back plates, leg holders and base plates. Also included are PVC caps suitable for 3-ft posts ( sold separately), and all necessary carriage bolts. This dock ramp hardware kit accommodates ramps with capacities of either 1200-lbs or 2500-lbs, when used with 4-in or 5-in rollers (not included).

This elegantly designed aluminum Dock Cleat is ideal for securing boats to either aluminum or wooden docks. Built with premium cast aluminum, this mooring cleat features a unique 25° angle to enhance dockside clearance, and includes a large centre opening for ease of use. Mounting holes suitable for 1/2-in bolts enable a secure fit. Compatible with Multinautic docks, this high-quality cleat delivers longevity and aesthetic appeal.

The Floating Dock Hardware "A" Kit contains all the essential connectors you need to assemble a sturdy, floating wood dock frame. This basic dock hardware kit includes heavy-duty inside corners, back plates, joist corners and all necessary mounting hardware. Each component is made from hot-dip, galvanized steel for optimal durability and corrosion resistance. Also ideal for any outdoor structural wood project, this dock construction kit is a practical and convenient choice for the DIYer.

The Floating Dock Hardware "B" Kit is designed as a complement to product No. 19160 ("A" Kit ). This comprehensive dock hardware set includes 10 joist corners, 20 back plates and four heavy-duty back plates. This hardware kit also comes with all essential mounting hardware, including carriage bolts. All components are fabricated from hot-dip galvanized steel to deliver outstanding corrosion resistance and durability.

Protect your boat from dock damage with this resilient Corner Dock Bumper. This non-marking, black, PVC bumper offers superior cushioning without leaving marks on your hull, as the colour is moulded into the vinyl material. Installation is straightforward, allowing for a hassle-free setup. This essential dock accessory absorbs and deflects the impact of countless minor bumps and scrapes while your vessel is landing or docked. 

This flat Dock Bumper is made from premium PVC material to offer superior protection for your docking area. The 18-in black bumper is resistant to UV-rays, saltwater and fungal growth for reliable, long-term performance in demanding marine settings. Its durable, non-marking construction ensures a clean appearance with minimal maintenance. This essential boating accessory installs horizontally or vertically to suit different docking needs, and features four mounting holes for easy installation. 

The Eagle Floats EF-450 HLW Dock Float is designed for both new constructions and replacement builds. This hollow dock float is built in the USA from UV and impact-resistant polyethylene for lasting performance in harsh marine environments. The one-piece design features seamless rotational moulding that prevents leaks and enhances stability. This float includes a heavy-duty mounting flange with pre-moulded holes, making it compatible with wood, aluminum or steel docks. 

The Eagle Floats EF-250 HLW is a premium Dock Float designed for both new builds and replacements. This hollow dock float is built in the USA from UV and impact-resistant polyethylene for lasting performance in harsh marine environments. The one-piece design features seamless rotational moulding that prevents leaks and enhances stability. This float includes a heavy-duty mounting flange with pre-moulded holes, making it compatible with wood, aluminum or steel docks. 

This flat Dock Bumper is made from premium PVC material to offer superior protection for your docking area. The 18-in white bumper is resistant to UV-rays, saltwater and fungal growth for reliable, long-term performance in demanding marine settings. Its durable, non-marking construction ensures a clean appearance with minimal maintenance. This essential boating accessory installs horizontally or vertically to suit different docking needs, and features four mounting holes for easy installation. 

This Dock Float delivers 370 lbs (168 kg) of reliable net buoyancy, providing stable and secure support for both aluminum and wood docks. Designed for long-term use in harsh marine environments, it features a durable, UV-resistant, and environmentally friendly construction made from recyclable materials. Its one-piece, rotationally moulded design resists damage from ice, animals, and petroleum products, while the integrated bolt-on flange ensures quick, easy installation on new or existing docks.

Built for strength and longevity, this Dock Float is engineered to provide reliable support in marine environments. It features a seamless, UV-resistant polyethylene shell filled with durable closed-cell EPS foam, offering 500 lbs of buoyancy. Designed to withstand saltwater, sunlight, oil, and gas spills, it ensures consistent performance over time. Ideal for new dock builds or replacing existing floats, it’s a dependable, long-lasting solution backed by a 15-year limited warranty.

Designed to fit perfectly over 1-11/16" dock posts, these black vinyl caps offer a simple yet effective layer of protection. By covering the top end, they help prevent injuries from sharp edges while keeping rainwater from collecting inside the pipe. They're especially useful on posts that have been cut down, reducing the risk of internal rust. The low-profile black finish blends in seamlessly with most dock setups, offering a cleaner, more polished look. Installation is quick and tool-free.

Made to reinforce cleats on wooden docks, this galvanized corner bracket helps distribute the tension caused by mooring lines more evenly. Its angled design fits discreetly under the dock edge, while providing solid, long-term anchoring. Built from hot-dip galvanized steel, it stands up to water exposure and temperature swings. Use with carriage bolts for a secure hold, even under heavy load.

Perfect for tying off small boats, this 6-inch mooring cleat installs easily on wood or aluminum docks. Made of hot-dip galvanized steel, it offers excellent durability in humid and salt-prone environments. Its traditional shape allows fast, single-handed line tie-offs. The 1.18" spacing between mounting holes provides solid anchoring using 3/8" x 3" bolts or lag screws (not included).

This galvanized dock post can be used vertically or horizontally to support or anchor various outdoor structures. Its 1 11/16" outside diameter fits perfectly with compatible MultiNautic base plates and protective caps. The 0.14" wall thickness provides solid stability, whether used for a dock section, a ramp, or as a temporary anchor point.

This complete kit simplifies mooring setup for fixed or floating docks. It includes a 16 ft black dock bumper for easy mounting to wood or aluminum frames, plus two 8" open-base aluminum cleats angled inward at 20° to prevent hull contact. Two double-braided nylon dock lines finish the package. A practical and cohesive set that ensures secure boat docking with streamlined installation.

Designed to replace the pins used with Multinautic dock hinges (items 10004 and 11003), this angled dock pin provides a secure and quick connection for fixed or floating dock sections. Its 1/2-inch diameter fits perfectly with compatible components, and the 90° angle makes it easy to handle during assembly or removal. Made of hot-dip galvanized steel, it comes with a locking pin for added security. A small but essential part that helps keep your dock stable, season after season.

Designed to provide stable support for stationary dock sections, this kit includes two galvanized base plates and two black PVC caps. The 6" x 6" square plates accommodate posts up to 2 inches in diameter, keeping them securely anchored once driven into the ground. The included caps cover sharp pipe ends, enhancing safety around the dock. Pre-drilled holes allow the addition of a baseboard for muddy bottoms. A simple, well-thought-out solution for anchoring your dock safely.

Designed for easy transport and installation in remote areas, the QPF-495 dock kit includes everything you need to assemble a modular section. Its aluminum frame features diagonal braces and stainless steel hardware for simple setup, while the top rail allows you to attach accessories without drilling into the decking. Whether floating, anchored, or fixed, this section adapts to various layouts using the included joints. The decking—two separate 5 ft x 5 ft panels—is sold separately.

Designed to stabilize docks in soft soil, this base plate is intended to support a post and evenly distribute the load. Its hot-dip galvanized steel construction offers excellent resistance to corrosion, even when partially submerged. Mounted at the bottom of the post, it prevents sinking, especially in sandy or muddy areas. Commonly used for modular dock systems, it simplifies installation while providing stable and secure footing.

Designed to securely moor boats, this dock cleat is made of hot-dip galvanized steel, providing excellent resistance to rust and marine environments. Its sturdy design accommodates mooring lines up to 1/2 inch in diameter, while the two mounting points ensure a stable installation. Ideal for residential or commercial docks, it can be reinforced with a dedicated backing plate for larger boats and should be installed using 5/16 in bolts or lag screws (not included).

Made from durable nylon, this 6-inch mooring cleat is designed to provide a solid anchor point on docks, pontoons, or boats. Lightweight and corrosion-resistant, it withstands marine conditions without warping. Its double-hole design allows for a strong attachment with two No.12 screws, ensuring a simple and secure installation. Thanks to its functional shape, tying and untying lines is easy—even with thick ropes. Ideal for residential or recreational use in nautical settings.

Designed to securely fasten chains to docks or other structures, this galvanized steel tie plate delivers impressive mechanical strength, even under demanding outdoor conditions. Its 1/4 in thick plate features 9/16 in square holes, spaced 3 1/2 in apart vertically, centre to centre. Compatible with 1/2 in hex bolts (not included), it allows for a reliable installation and fits seamlessly into various setups. Ideal for marine environments or any application requiring a durable anchor point.

Designed to protect both boats and docks during mooring maneuvers, this dock corner bumper installs easily on most structures. Its 1 1/4" raised profile extends above dock level to provide effective protection for both the top and sides. Made of marine-grade PVC, it won’t mark hulls and is UV resistant. The sturdy mounting flaps ensure a strong hold, while the colour is embedded directly into the vinyl for long-lasting durability without surface transfer.

Designed to securely hold an anchor chain, this tie plate can be installed on the inside or outside of a wooden dock. It accommodates chains up to 1/2" in diameter and allows for easy adjustments during the season. The practical 9/16" x 1" slotted holes, spaced 2 1/2" and 3 1/2" center-to-center, make alignment easier during installation. In addition, its galvanized steel construction ensures consistent mechanical strength, even in environments subject to water level fluctuations.

Designed to securely anchor a wooden or aluminum dock, this hot-dip galvanized pile offers excellent corrosion resistance, even in marine environments. With a length of 8 feet and an outer diameter of 1 11/16", it fits most dock structures. Its tubular design allows for deep ground insertion, while the length can be cut to suit specific needs.

This galvanized steel dock hinge is designed to securely connect two dock sections while allowing for limited movement. Its 1/2" hinge pin and U-shaped structure provide smooth articulation up to 120°, making it ideal for platforms subject to water level variations. Perfectly suited for wooden docks, its galvanized finish offers enhanced corrosion resistance, even in marine or high-humidity environments.

This galvanized reinforcement plate is designed to evenly distribute the tension exerted by bolts when installed behind inside corners or dock hinge brackets. Measuring 2 1/2" x 6" with a thickness of 3/16", it provides enhanced structural strength. The 9/16" x 1" slotted holes, spaced 4 1/2" centre to centre, make alignment easier during installation. Compatible with 1/2" x 3" bolts (no. 22276), it’s ideal for dock assemblies subjected to significant mechanical stress.

This hot-dip galvanized inside corner is designed to securely join two wooden parts at a right angle. With a 3/16" thickness, it provides excellent mechanical strength for structures exposed to the elements. Ideal for wooden docks, it ensures a stable and long-lasting connection. The galvanized steel construction extends its service life by protecting it from corrosion, even in humid or marine environments.

This manual winch, with a 1,300 lb capacity, makes it easier to pull boats onto a roller ramp or trailer. Its two-way ratchet mechanism provides smooth control during both launch and retrieval. The high-carbon steel gear features a zinc finish for corrosion resistance, even in damp environments. Designed for various lifting tasks, it accommodates a 23-foot strap (sold separately). Installation requires mounting hardware, not included.

Made of double-braided nylon, this black dock line provides a firm anchor for boats up to 20 ft. Its 3/8 in diameter offers a comfortable grip, while the 12 in pre-spliced loop makes it easy to secure to bow, stern, or side cleats. Flexible and durable, it remains easy to handle in all conditions. Designed to secure a boat to the dock, it combines strength and suppleness—even after extended exposure to moisture or sunlight.

This hot-dip galvanized dock connector is designed to join two dock sections while allowing controlled movement. Its 5" x 5" plates, with a 1/8" thickness, provide a solid joint, while the 1/2" pin shaft ensures smooth articulation without excessive play. The 7/16" mounting holes are compatible with 3/8" carriage bolts, to be selected according to the project. Used on its own or with reinforcing plates, it contributes to a sturdy, durable, and low-maintenance dock structure.

Designed to reinforce dock corners and joints, this square plate made of hot-dip galvanized steel ensures a strong and lasting connection between sections. Its 5" x 5" dimensions and 1/4" thickness make it a reliable choice for structures subject to heavy loads. Pre-drilled oblong holes make alignment and installation easier with 1/2" x 3" carriage bolts. It can be used alone or paired with corners or joints to create a consistent, dependable, and weather-resistant structure.

This galvanized steel hinge is designed to securely and durably connect two sections of a floating dock. Its 3/4" pin with safety clip ensures smooth articulation while limiting lateral movement. The 5" x 5" plates, made from 1/4" thick steel, are easy to install thanks to predrilled holes. Best used with 1/2" x 3" carriage bolts, this component pairs well with interior corners or reinforcement plates to form a consistent and reliable dock structure.

Designed for outdoor structures exposed to the elements, this set of 8 carriage bolts ensures strong and lasting assembly. Each 3/8" x 2 1/2" bolt features a square neck under the head to prevent turning during tightening. The set also includes eight nuts and eight lock washers. Made entirely of galvanized steel, these components are suited for applications requiring strength and corrosion resistance. Ideal for assembling 7/16" hardware.